Industrial water treatments :
Optimize your industrial processes
Our range of products is highly effective in preserving industrial processes from contamination.
and deterioration due to harmful microorganisms,
such as bacteria and fungi.
At LAMIRSA’s Polymerization Plant, we manufacture a diverse range of products, including specialized Antiscalants, Flocculants, Dispersants, and Cleaning Agents. These essential solutions are critical for achieving optimal quality in any production process.
Antifouling
Corrosion inhibitors
Flocculants
Dispersants
Cleaning agents
Reverse osmosis
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Scale inhibitors for water lines in paper manufacturing | |||
| INCUS®-CTR/40.BV | Based on acrylic polymers and phosphonic derivatives | 10-50 ppm in the recirculating water | |
| INCUS®-CTR/75 | Based on maleic acid terpolymer in aqueous solution | 10-50 ppm in the recirculating water | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Scale inhibitors and corrosion inhibitors for cooling water systems | |||
| Fouling inhibitors with ON-LINE concentration control | |||
| AQUAMIR®- F/PLUS | Combination of acrylic polymers with phosphonic derivatives | 10-40 ppm residual | |
| AQUAMIR®-F/40 | Combination of acrylic polymers with phosphonic derivatives | 10-40 ppm residual | |
| AQUAMIR®-F/47 | Combination of acrylic polymers with phosphonic derivatives and zinc salts. | 10-40 ppm residual | |
| Scale inhibitors | |||
| INCUS®-CTR/3 | Combination of acrylic polymers with phosphonic derivatives | 10-50 ppm in the recirculating water | |
| INCUS®-CTR/40 | Combination of acrylic polymers with phosphonic derivatives | 10-50 ppm in the recirculating water | |
| DISPERSENE-424/PLUS | “Concentrated dispersant/antifouling agent based on acrylic polymers with phosphonic derivatives.” | 10-50 ppm in recirculation water | |
| INCUS®-CTR/47 | Dispersant/antifouling concentrate based on acrylic polymers with phosphonic derivatives. | 20-50 ppm in the recirculating water | |
| INCUS®-CTR/50 | Acrylic polymer base dispersant | 10-50 ppm in the recirculating water | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Scale Inhibitors and Corrosion Inhibitors for Boilers and Condensate Steam Systems | |||
| Scale inhibitors for boilers | |||
| INCUS®-CTR/5.L | Combination based on acrylic polymers and phosphonic derivatives. | 3-6 ppm of product per ppm of total hardness in feed water | |
| INCUS®-CTR/20 | Product based on inorganic polyphosphates and acrylic polymers. | 3-6 ppm of product per ppm of total hardness in feed water | |
| INCUS®-CTR/500.C | Combination based on acrylic polymers and phosphonic derivatives. | 3-6 ppm of product per ppm of total hardness plus iron in feedwater | |
| Corrosion inhibitors for boilers | |||
| RESTIN®-41 | Product based on activated hydrazine | 6-7 ppm of product per ppm of O2 in feed water | |
| RESTIN®-51 | Hydrazine-based product | 6-8 ppm of product per ppm of O2 in feed water | |
| RESTIN®-60/L | Product based on potassium sulfite | 20-25 ppm of product per ppm of O2 in feed water | |
| RESTIN®-60/L-AL | Product based on sodium bisulfite. | 10-12 ppm of product per ppm of O2 in feed water | |
| RESTIN®-6010 | Product based on sodium sulfite in an alkaline medium. | 80-90 ppm of product per ppm of O2 in feed water | |
| RESTIN®-62/C | Product based on neutralizing organic amines. | Dosage necessary to maintain the condensate pH between 8 and 8.5 | |
| RESTIN®-63/C | Product based on neutralizing organic amines. | Dosage necessary to maintain the condensate pH between 8 and 8.5 | |
| RESTIN®-66/C | Product based on neutralizing organic amines. | Dosage necessary to maintain the condensate pH between 8 and 8.5 | |
| RESTIN®-95/AFD | Product based on organic amines and inorganic alkalinizers. | Dosage necessary to maintain the condensate pH between 8 and 8.5 | |
| RESTIN®-98/A | Product based on activated diethylhydroxylamine, neutralizing amines and acrylic polymers. | 10-12 ppm of product per ppm of O2 in feed water | |
| RESTIN®-400/SV | Product based on activated hydrazine | 18-21 ppm of product per ppm of O2 in feed water | |
| RESTIN®-970/C | Product based on carbohydrazide and alkalinizing amines. | 20-30 ppm of product per ppm of O2 in feed water | |
| RESTIN®-980 | Activated diethylhydroxylamine based product | 8-10 ppm of product per ppm of O2 in feed water | |
| Combined scale inhibitor plus corrosion inhibitor for boilers | |||
| RESTIN®-CTR/18,L | Product based on sulfites, polyphosphates and acrylic polymers. | 80-90 ppm of product per ppm of O2 in feed water | |
| RESTIN®-67/CF | Product based on sulfites, neutralizing amines and acrylic polymers. | 120-124 ppm product per ppm O2 in feed water | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Scale inhibitor for osmosis | |||
| INCUS®-RO/3 | Product based on acrylic polymers and phosphonic derivatives. | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/40 | Product based on acrylic polymers and phosphonic derivatives. | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/50 | Product based on acrylic polymers | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/89 | Product based on phosphonic derivatives | 2-6 ppm over flow rate to be treated | |
| INCUS®-RO/100 | Product based on phosphonic derivatives | 2-6 ppm over flow rate to be treated | |
| RESTIN®-RO/75 | Maleic copolymer based | 0.5-3 ppm on flow rate to be treated | |
| RESTIN®-RO/130 | Based on inorganic polyphosphates | 1-10 ppm on flow rate to be treated | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Corrosion inhibitors | |||
| RESTIN®-13/L | Based on azole derivatives | 4-10 ppm in recirculation water | |
| RESTIN®-16 | Based on phosphonic derivatives and zinc salts | 10-50 ppm in the recirculating water | |
| RESTIN®-18/MP | Based on molybdates and inorganic phosphorus compounds | 30-80 ppm in the recirculating water | |
| RESTIN®-22/S | Product based on nitrites, alkalinizers and organic inhibitors. | 500-5000 ppm over total volume | |
| RESTIN®-32/S | Based on molybdates, acrylic polymers and organic inhibitors. | 1000 to 5000 ppm over total volume | |
| RESTIN®-40/C | Based on molybdates, inorganic phosphates, acrylic polymers, phosphonic derivatives and azoles in alkaline medium. | 50-100 ppm in the recirculating water | |
| RESTIN®-44/C | Based on molybdates, acrylic polymers, phosphonic derivatives and azoles in an alkaline medium. | 50-100 ppm in the recirculating water | |
| RESTIN®-81/C | Based on molybdates, acrylic polymers, phosphonic derivatives and azoles in an alkaline medium. | 20-60 ppm in the recirculating water | |
| RESTIN®-130 | Based on inorganic polyphosphates | 10-50 ppm in recirculation water | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Coagulants and flocculants for industrial waters | |||
| FLOCUSOL®-CM/1 | Dimethylamine-epichlorohydrin-based cationic polymer | 1-25 ppm in water clarification / 1-5 ppm over total volume as a de-emulsifier | |
| FLOCUSOL®-AT/811 | Cationic polymer based on poly DADMAC in aqueous medium. | 1-25 ppm in water clarification / 1-5 ppm over total volume as a de-emulsifier | |
| FLOCUSOL®-PA/18 | Product based on aluminum polychloride | 5-100 ppm in water clarification | |
| FLOCUSOL®-PA/10AB | Product based on aluminum polychlorosulfate. | 5-100 ppm in water clarification | |
| Anionic flocculants | |||
| FLOCUDEX-AS/7P | Product based on anionic polyacrylamide. | 0.2-3 ppm in flocculation | |
| FLOCUDEX-AS/10 | Product based on anionic polyacrylamide. | 0.2-3 ppm in flocculation | |
| FLOCUDEX-AS/10.XR | Product based on anionic polyacrylamide. | 0.2-3 ppm in flocculation | |
| FLOCUDEX-AS/23 | Product based on anionic polyacrylamide. | 0.2-3 ppm in flocculation | |
| FLOCUDEX-AS/300 | Product based on anionic polyacrylamide. | 0.2-3 ppm in flocculation | |
| FLOCUSOL®-AM/1 | High molecular weight anionic polyacrylamide based product in emulsion. | 0.5-2 ppm in flocculation | |
| Cationic flocculants | |||
| FLOCUDEX-CS/43 | Based on an acrylamide copolymer with cationic character | 1-5 Kg per Tm of dry sludge | |
| FLOCUDEX-CS/49 | Based on an acrylamide copolymer with cationic character | 1-5 Kg per Tm of dry sludge | |
| FLOCUSOL®-CM/78 | Product based on a high molecular weight cationic acrylamide copolymer in emulsion. | 0.5-5 ppm in water clarification / 2-8 kg per mt of dry sludge in sludge dewatering | |
| FLOCUDEX-CS/5000 | Based on an acrylamide copolymer with cationic character | 1-5 Kg per Tm of dry sludge | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose |
|---|---|---|
| FLOCUDEX®-AS/23 | Solid product based on anionic polyacrylamide | 0,2-3 ppm in flocculation |
| FLOCUDEX®-CS/500 | Solid product based on anionic polyacrylamide | 1-5 kg per Tm of dry sludge |
| FLOCUSOL®-AM/1 | Product based on high molecular weight anionic polyacrylamide in emulsion | 0,5-2 ppm in water clarification / 300-1.000 gr per Tm of dry sludge |
| FLOCUSOL®-CM/75 | Product based on high molecular weight cationic polyacrylamide in emulsion | 0,5-5 ppm in water clarification / 2-8 kg per Tm of dry sludge in sludge dewatering |
| FLOCUSOL®-CM/78 | Product based on high molecular weight cationic polyacrylamide in emulsion | 0,5-5 ppm in water clarification / 2-8 kg per Tm of dry sludge in sludge dewatering |
| FLOCUSOL®-PA/18 | Product based on aluminum polychloride | 5-100 ppm in water clarification |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Dispersing agents for the manufacture of paints and coatings | |||
| DISPERSENE-E/148.A | Anionic dispersant/stabilizer based on a concentrated solution of ammonium salts of polycarboxylic acids. | 0.3-2% on total weight of pigments and fillers | |
| DISPERSENE-P/50 | Anionic dispersant/stabilizer based on a concentrated solution of sodium salts of polycarboxylic acids. | 0.3-2% on total weight of pigments and fillers | |
| DISPERSENE-P/100 | Anionic dispersant/wetting agent based on inorganic polyphosphates. | 0.2-0.4% on total weight of pigments and fillers | |
| DISPERSENE-P/80 | Anionic dispersant/stabilizer based on a concentrated solution of sodium salts of polycarboxylic acids. | 0.3-2% on total weight of pigments and fillers | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose |
|---|---|---|
| Dispersants for water circuits in the paper industry | ||
| DISPERSENE-50 | Biodispersant based on non-ionic surfactants | 5-30 ppm in recirculation water. 0.5-3 ppm in once-through circuits 20-35 ppm in very dirty systems. |
| DISPERSENE-424/PLUS | Dispersant/Antifouling concentrate based on polycarboxylic compounds and phosphonic derivatives. | 10-50 ppm in recirculation water |
| DISPERSENE-AC/41 | Dispersant/Antifouling agent based on acrylic polymers | 10-50 ppm on volume of supply |
⇐ Scroll to view more columns⇒
⇐ Desplazar para ver más columnas⇒
| Cleaning products for cooling circuits, boilers and condensed steam systems | |||
| Product | Chemical nature | Dose | |
|---|---|---|---|
| COLABE® LIQUID-T/1 | Product based on mineral acids inhibited in aqueous medium. | 1-3% of total volume of cleaning water | |
| COLABE® POWDER-100 | Product based on strong organic acids | 1-5% of total volume of cleaning water | |
| COLABE® SA/100 | Product based on inorganic acids | 1-5% of total volume of cleaning water | |
| COLABE® SA/1000 | Product based on inorganic acids | 10-25% on total volume of cleaning water | |
⇐ Scroll to view more columns⇒
⇐ Scroll to view more columns⇒
| Product | Chemical nature | Dose | |
|---|---|---|---|
| Products for osmosis membrane treatment for cleaning osmosis membranes | |||
| Chlorine removal | |||
| DISPERSENE-CHLOR | Aqueous sodium metabisulfite solution | 4 ppm of product per ppm of chlorine | |
| Osmosis scale inhibitors | |||
| INCUS®-RO/3 | Product based on acrylic polymers and phosphonic derivatives. | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/40 | Product based on acrylic polymers and phosphonic derivatives. | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/50 | Product based on acrylic polymers | 0.5-3 ppm on flow rate to be treated | |
| INCUS®-RO/89 | Product based on phosphonic derivatives | 2-6 ppm over flow rate to be treated | |
| INCUS®-RO/100 | Product based on phosphonic derivatives | 2-6 ppm over flow rate to be treated | |
| RESTIN®-RO/75 | Based on maleic polymer derivatives | 0.5-3 ppm on flow rate to be treated | |
| RESTIN®-RO/130 | Based on inorganic polyphosphates | 1-10 ppm on flow rate to be treated | |
⇐ Scroll to view more columns⇒
SPECIALIZED CUSTOMER SERVICE
The continuous evolution and adaptation of our assistance protocols, as applied to the production processes and facilities, allow us to move forward together with our customers and perform a detailed follow-up of the performance of our products and treatments with the help of our technical specialists during after-sales service.
